Processing temperature: from +5°C to +40°C.
Apply to clean, dust and grease-free substrate.
If necessary clean with Tec7 Cleaner or Multiclean.
Apply with manual or air caulking gun (best with telescopic plunger).
Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials. Start by strengthening weak and/or porous substrates with Fixprimer.
Alkyd resin will harden slowly.
Use Tec7 Cleaner to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers.
Use HP Clean to finish porous materials.
When gluing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
Ideal adhesive thickness for optimal adhesion strength: 3 mm

€18.91 inc VAT

TEC7 Trans Multi Bonding Silicon Sealant & Adhesive 310ml | White

535206000

Processing temperature: from +5°C to +40°C.
Apply to clean, dust and grease-free substrate.
If necessary clean with Tec7 Cleaner or Multiclean.
Apply with manual or air caulking gun (best with telescopic plunger).
Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials. Start by strengthening weak and/or porous substrates with Fixprimer.
Alkyd resin will harden slowly.
Use Tec7 Cleaner to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers.
Use HP Clean to finish porous materials.
When gluing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
Ideal adhesive thickness for optimal adhesion strength: 3 mm

€18.50 inc VAT

Accessories